Brocade Communications Systems StoreFabric SN6500B Reference page 468

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is

<Value> <Unit>.

Message Type

Probable Cause

Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. If the supplied

voltage of the SFP transceiver is outside of the normal range, this may indicate a hardware failure.

No action is required. Respond to this message as is appropriate to the particular policy of the end-user

installation. If the message persists, replace the SFP.

<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Message Type

Probable Cause

Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low

Verify that your optical components are clean and function properly. Replace deteriorating cables or

SFPs. Check for damage from heat or age.

<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Message Type

Probable Cause

Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high

The supplied current of the SFP transceiver is outside of the normal range, indicating possible hardware

failure. If the current rises above the high boundary, you must replace the SFP.

Fabric OS Message Reference

53-1002749-01

Fabric os v7.1.0