Brocade Communications Systems StoreFabric SN6500B Reference page 734

5
SEC-1096
SEC-1096
Message
Failed to delete <policy name> because <reason text>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a policy cannot be removed because deleting it would result in an invalid security policy
configuration.
Recommended
Verify the security policy configuration requirements and remove any policies that require the policy you
Action want to be removed first.
SEC-1097
Message
Cannot find <active or defined> policy set.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified policy could not be found.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action supportSave command and contact your switch service provider.
SEC-1098
Message
No <active or defined> FCS list.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified policy could not be found.
Recommended
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
Action supportSave command and contact your switch service provider.
712
Fabric OS Message Reference
53-1002749-01