Brocade Communications Systems StoreFabric SN6500B Reference page 223

C3-1026
Message
S<slot number>,P<port number>(<blade port number>): Faulting F_port due to extra
credit detected:ftx=<ftx> curr_cred=<current credits> actual_cred=<actual
credits>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
When this error is observed persistently, replace the device.
Action
C3-1027
Message
Detected credit loss on Peer internal Port of Slot <slot number>, Port <port
number>(<blade port number>) vc_no=<vc number> crd(s)lost=<Credit(s) lost>
complete_loss:<complete credit loss>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that credit loss was detected on the peer port.
Recommended
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
Action slotPowerOn commands. If the problem persists, replace the blade.
C3-1028
Message
Detected excessive Link resets on the port in a second. Slot <slot number>, Port
<port number>(<blade port number>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the port received excessive link resets from peer port within 1 second and that exceeded
the threshold.
Recommended
When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the
Action cable on the peer port to which this port is connected.
Fabric OS Message Reference
53-1002749-01
5
C3-1026
201