Brocade Communications Systems StoreFabric SN6500B Reference page 324

5
ESW-1007
ESW-1007
Message
Switch port <port number> disabled due to \"<disable reason>\".
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch port is disabled due to the reason displayed in the message.
Recommended
Based on the disable reason displayed, take appropriate action to restore the port.
Action
If the disable reason is "Insufficient frame buffers", reduce the distance or speed settings for the port to
reduce the buffer requirement of the link. Alternatively, one or more ports in the port group must be
disabled to make more buffers available for the link.
Refer to the Fabric OS Administrator's Guide for more information.
ESW-1008
Message
<area string> are port swapped on ports that do not support port swap. Slot <slot
number> will be faulted.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the blade is enabled with the port configuration that already has the area swapped.
Recommended
Replace the blade with ports that support port swap. Then swap ports back to the port's default area.
Action
Refer to the Fabric OS Administrator's Guide for more information.
302
Fabric OS Message Reference
53-1002749-01