Brocade Communications Systems StoreFabric SN6500B Reference page 346

5
FABS-1010
FABS-1010
Message
<Function name>: Wrong media_event <Event number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Reboot or power cycle the switch.
Action
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1011
Message
<Method name>[<Method tag number>]:Invalid input state 0x<Input state code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that an unrecognized state code was used in an internal Fabric OS message for a
field-replaceable unit (FRU).
Recommended
Reboot or power cycle the CP or system.
Action
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1013
Message
<Method name>[<Method tag number>]:Unknown blade type 0x<Blade type>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an unrecognized type of blade has been discovered in the system.
This may be caused by an incorrect field-replaceable unit (FRU) header, inability to read the FRU
header, or the blade may not be supported by this platform or Fabric OS version.
Recommended
Verify that the blade is valid for use in this system and this version of Fabric OS.
Action
Reseat the blade.
If this is a valid blade and reseating does not solve the problem, replace the blade.
324
Fabric OS Message Reference
53-1002749-01