Brocade Communications Systems StoreFabric SN6500B Reference page 403

FICN-1024
Message
DevTapeEgr:FICON Purge received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Purge Path command sequence for a device.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1025
Message
DevTapeIng:Auto Sense Data received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Bytes0-0xB=0x<bytes 0-3 of sense
data from the device><bytes 4-7 of sense data from the device><bytes 8-0x0b of
sense data from the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON Tape Write Pipelining processed sense data from a FICON device.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1026
Message
DevTapeIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status
Path=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the FICON Tape Write Pipelining is completing an emulated Selective Reset sequence.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
Fabric OS Message Reference
53-1002749-01
5
FICN-1024
381