Brocade Communications Systems StoreFabric SN6500B Reference page 418

5
FICN-1069
FICN-1069
Message
Emulation Configuration Error on TunnelId <Tunnel ID>:.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of the
configuration issue.
Recommended
If resolution of the configuration issue cannot be completed, contact your vendor's customer support for
Action assistance.
FICN-1070
Message
DevTapeIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the normal end of tape status (0x0D or 0x05) is received from the device or error status
(including Unit Check 0x02) is received from an active emulation device.
Recommended
The end of tape is a normal event during pipelining and not the unit check. If there are associated I/O
Action error messages with this event, contact your vendor's customer support for assistance.
FICN-1071
Message
HostTapeIngr:Tape Loaded on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the tape I/Os are processed from a locally connected Logical Partition (LPAR), which indicates
that a tape is loaded on a device.
Recommended
No action is required.
Action
396
Fabric OS Message Reference
53-1002749-01