Brocade Communications Systems StoreFabric SN6500B Reference page 869

SWCH-1013
Message
Trunk Area has been disabled for one or more ports.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that a Trunk Area assignment has been disabled for one or more ports and the configuration file
has been updated.
Recommended
No action is required.
Action
SWCH-1014
Message
All Trunk Areas have been disabled.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that all Trunk Areas have been disabled and the configuration file has been updated.
Recommended
No action is required.
Action
SWCH-1015
Message
<Function name> <Description of problem>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal problem has been detected by the software. This is usually an internal Fabric
OS problem or due to file corruption.
Recommended
Reboot or power cycle the switch.
Action
If the message persists, execute the firmwareDownload command to update the firmware.
Fabric OS Message Reference
53-1002749-01
5
SWCH-1013
847