Brocade Communications Systems StoreFabric SN6500B Reference page 766

5
SEC-1315
SEC-1315
Message
<Name of command> command failed -<List of databases rejecting distribution> db(s)
configured for rejection on this switch.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates there was an attempt to distribute databases to a switch that was configured not to accept
distributions from the fabric.
Recommended
Verify the accept distribution configuration for the listed databases. Use the remoteeCfg command to
Action verify and correct the configuration if necessary.
SEC-1316
Message
<Policy Name> policy WWN List is conflicting with domain <Domain Number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the newly added switches to the fabric, as specified by domain number, have a conflicting
policy with the local switch.
Recommended
Check the conflicting policy and make the new switches and the local switch policies the same.
Action
SEC-1317
Message
Inconsistent fabric, rejecting transaction
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that either this domain is performing FDD merge or matched domains are not the same as what
CM sees.
Recommended
If a policy conflict exists, resolve it, and then wait for the fabric to become stable. Retry the distribution.
Action
744
Fabric OS Message Reference
53-1002749-01