Brocade Communications Systems StoreFabric SN6500B Reference page 756

5
SEC-1192
SEC-1192
Message
Security violation: Login failure attempt via <connection method>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a serial or modem login security violation was reported. The wrong password was used while
trying to log in through a serial or modem connection; the login failed.
Recommended
Use the correct password.
Action
SEC-1193
Message
Security violation: Login failure attempt via <connection method>. IP Addr: <IP
address>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a specified login security violation was reported. The wrong password was used while trying to
log in through the specified connection method; the login failed.
Recommended
The error message lists the violating IP address. Verify that this IP address is being used by a valid
Action switch admin. Use the correct password.
SEC-1194
Message
This switch does not have all the required PKI objects correctly installed.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
Action the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
734
Fabric OS Message Reference
53-1002749-01