Brocade Communications Systems StoreFabric SN6500B Reference page 548

5
FW-1501
FW-1501
Message
Mail overflow cleared - <Mails discarded> alerts discarded.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the mail overflow condition has cleared.
Recommended
No action is required.
Action
FW-1502
Message
Invalid Email address <Invalid address> is configured from pre-7.0.0 config file.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the configuration file has invalid e-mail addresses.
Recommended
Reconfigure a valid e-mail address.
Action
FW-1510
Message
<Area string> threshold exceeded(High=<Threshold high>). Current value is
<Current value>: Port <Port number> disabled.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified port is now disabled because the link on this port had multiple link failures
that exceeded the Fabric Watch threshold on the port. Both physical and hardware problems can cause
link failures. Link failures frequently occur due to a loss of synchronization. Link failures also occur due to
hardware failures, a defective small form-factor pluggable (SFP), or a faulty cable.
Protocol errors indicates CRC sum disparity. Occasionally, these errors occur due to software glitches.
Persistent errors occur due to hardware problems.
Recommended
Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then, enable the port
Action using the portEnable command.
526
Fabric OS Message Reference
53-1002749-01