Brocade Communications Systems StoreFabric SN6500B Reference page 829

SS-1006
Message
supportsave not collected for slot <Slot Number>. Reason: blade was not available
to accept a supportsave request.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the supportsave request was not sent to the blade in the specified slot.
Recommended
Restart the switch using the reboot command and then execute the supportSave command.
Action
SS-1007
Message
supportsave failed for the slot <Slot Number>. Reason: No response from the blade
in the specified slot for the given supportsave request.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there was no response from the blade in the specified slot for the given supportsave
request.
Recommended
Restart the switch using the reboot command and then execute the supportSave command.
Action
SS-1008
Message
supportsave failed for the slot <Slot Number>. Reason: BP supportsave timeout.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified slot has taken more time than expected to collect the supportsave logs.
Recommended
Execute the supportSave command again.
Action
Fabric OS Message Reference
53-1002749-01
5
SS-1006
807