Brocade Communications Systems StoreFabric SN6500B Reference page 404

5
FICN-1027
FICN-1027
Message
DevTapeIng:Device level exception found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID of
the frame that included the Device Level Exception>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active emulation device delivered a Device Level Exception frame to the emulation
processing.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1028
Message
HostDiskIng:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<The current emulation
state of the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an active emulation device received a cancel operation from the FICON channel.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-1029
Message
HostDiskIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<The current emulation
state of the device> LastCmds=0x<The last 4 commands received from the channel for
this device> LastStatus=0x<The last 4 status values presented to the channel for
this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active disk emulation device received a Selective Reset from the FICON channel.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
382
Fabric OS Message Reference
53-1002749-01