Brocade Communications Systems StoreFabric SN6500B Reference page 741

SEC-1119
Message
Secure mode has been enabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the secure Fabric OS was enabled by the secModeEnable command.
Recommended
Verify the security event was planned. If the security event was planned, there is no action required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1121
Message
Time is out of range when <text>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS),
the data packet is corrupted, or a replay attack is launched on the switch.
Recommended
Verify the security event was planned. If the security event was planned, verify that all switches in the
Action fabric are in time synchronization with the primary FCS and that no external entity is trying to access the
fabric. When verification is complete, retry the operation.
SEC-1122
Message
Error code: <Domain ID>, <Error message>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that one of the switches in the fabric could not communicate with the primary fabric
configuration server (FCS).
Recommended
Run the fabricShow command to verify that all switches in the fabric are in the ready state. When all
Action switches are in the ready state, retry the operation.
Fabric OS Message Reference
53-1002749-01
5
SEC-1119
719