Administrator Settings-Ip & Vlan - Cisco EX60 User Manual

68 Settings
Administrator Settings—IP & VLAN
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!
About IP Settings
You may specify whether to use IPv4
or IPv6 and whether to use static IP
address or DHCP.
When set to Static, applicable
addresses must be set accordingly.
To change these from default values,
tap Advanced (not shown).
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
D1501611 User Guide Cisco TelePresence
EX60 and EX90
Produced: December 2014 for TC7.3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.