User Administration - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

User administration

You have to sign in to get access to the web and command line
interfaces. You can assign different roles to users, to determine
what they should have access to.
The default user account
The video system comes with a default administrator user
account with full access rights. The user name is admin and no
passphrase is initially set.
It is mandatory to set a passphrase for the admin user.
Read how to set the passphrase in the ► Change the system
passphrase chapter.
Create a new user account
1. Sign in to the web interface, and navigate to
2. Click Add new user....
3. Fill in the Username, Passphrase and Repeat passphrase input
fields.
As a default, the user has to change the passphrase when he
signs in for the first time.
Fill in the Client Certificate DN (Distinguished Name) field only
if you use client certificates for authentication.
4. Check the appropriate Roles check boxes.
If you assign the ADMIN role to a user, enter your own
passphrase in the Your passphrase input field for verification.
5. Set the Status to Active to activate the user.
6. Click Create User.
Use the Back button to leave without making any changes.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Configuration Peripherals
Edit an existing user account
If you make changes to a user that holds the Admin role, you must
always enter your own passphrase in the Your passphrase input
field for verification.
Change the user privileges
1. Sign in to the web interface, and navigate to
Security >
2. Click the appropriate user in the list.
3. Choose user roles, set the status to Acitve or
Inactive, and decide if the user has to change the
passphrase on the next sign in.
Fill in the Client Certificate DN (Distinguished
Name) field only if you use certificate login on
HTTPS.
4. Click Edit User
Security > Users.
Use the
Change the passphrase
1. Sign in to the web interface, and navigate to
2. Click the appropriate user in the list.
3. Enter the new passphrase in the appropriate input fields.
4. Click Change passphrase
Use the
Delete the user account
1. Sign in to the web interface, and navigate to
2. Click the appropriate user in the list.
3. Click Delete user...
Maintenance
Users.
to save the changes.
Back button to leave without making any changes.
Security >
to save the change.
Back button to leave without making any changes.
Security >
and confirm when prompted.
22
Administrator Guide
System settings
User roles
A user account may hold one or a
combination of user roles. A user account
with full access rights, like the default
admin user, should possess the ADMIN,
USER and AUDIT roles.
These are the user roles:
ADMIN: A user with this role can create
new users, change most settings, make
calls, and search the contact lists. The
user cannot upload audit certificates and
change the security audit settings.
USER: A user with this role can make
calls and search the contact lists. The
user can modify a few settings, for
example adjust the ringtone volume and
set the time and date format.
AUDIT: A user with this role can change
the security audit settings and upload
audit certificates.
ROOMCONTROL: A user with this role
can create in-room controls. The user
has access to the In-room control editor
Users.
and corresponding development tools.
INTEGRATOR: A user with this role has
access to settings, commands and status
that are required to set up advanced AV
scenarios, and to integrate our video
systems with 3 rd party equipment. Such a
user can also create in-room controls.
Cisco Spark registered systems
Users.
If a video system is registered to Cisco's
could service (Cisco Spark), only
local users with the INTEGRATOR and
ROOMCONTROL user roles are available.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Appendices