HP StorageWorks P9000 Manual page 87

Table 31 Error codes (part code 3005) (continued)
Part Error Error Message
Code Number
3005 68821 The specified volume is currently used
by Business Copy.
3005 68822 The specified volume is currently used
by Snapshot.
3005 68823 The specified volume is currently used
by Auto LUN.
3005 68824 The specified volume is currently used
by Continuous Access Synchronous or
External Storage Access Manager.
3005 68825 The specified volume is currently used
by Continuous Access Journal.
3005 68884 Quorum disks are included in the items
to be maintained.
3005 68892 The item to be formatted includes a Thin
Provisioning volume (V-VOL). However,
the V-VOL cannot be formatted because
there is a pool that has been blocked.
3005 68898 The DKC is set to the state of
suppression of the zero data
discarding.
3005 76509 The target to be set cannot be set
because the target has no access right
for a resource group.
3005 76513 The specified LDEV cannot be added
to a pool because the LDEV is a SATA-E
drive in quick formatting.
3005 78005 The specified operation cannot be
executed, because the LDEV capacity
exceeds the maximum reserved pool
capacity.
3005 78006 The specified LDEV capacity is invalid.
3005 78007 Failed to expand the V-VOLs, because
it took time for the processing.
3005 78008 The specified LDEV capacity exceeds
the threshold.
Recommended Action
Wait until the process of Business Copy
is completed, then retry the operation.
If this problem persists, please contact
HP Technical Support.
Wait until the process of Snapshot is
completed, then retry the operation.
If this problem persists, please contact
HP Technical Support.
Wait until the process of Auto LUN is
completed, then retry the operation.
If this problem persists, please contact
HP Technical Support.
Wait until the process of Continuous
Access Synchronous or External Storage
Access Manager is completed, then retry
the operation.
If this problem persists, please contact
HP Technical Support.
Wait until the process of Continuous
Access Journal is completed, then retry
the operation.
If this problem persists, please contact
HP Technical Support.
Release the quorum disks, then retry the
operation.
Restore the pool that has been blocked
by the Thin Provisioning function.
Please contact HP Technical Support.
Verify the available LDEVs or the
available parity groups.
Wait until the quick formatting for the
LDEV to be added to a pool is complete,
and then retry the operation.
Check the specified LDEV capacity, then
retry the operation.
Check the specified volume, then retry
the operation.
Retry the operation.
Check the specified LDEV capacity, then
retry the operation.
Severity
Level
E
E
E
E
E
W
W
E
W
W
W
W
W
W
Part code 3005 87