HP StorageWorks P9000 Manual page 67

Table 26 Error codes (part code 01022) (continued)
Part Error Error Message
Code Number
01022 105253 [Enabled] has been set to the Host Mode
Option for the Host Group #00 of the
specified port.
01022 105277 Some LDEVs or Host Groups that are not
available for LUN path setting are
excluded from the choices.
01022 105296 The operation cannot be performed
because there is no access right for a
resource group of the specified port.
01022 105297 The operation cannot be performed
because there is no access right for a
resource group of the specified host
group.
01022 105298 The operation cannot be performed
because there is no access right for a
resource group of the specified LDEV.
01022 105304 The operation cannot be performed
because there is no access right for a
resource group of the specified host
group.
01022 106501 The specified port does not exist in the
configuration.
01022 106502 The specified host group does not exist
in the configuration.
01022 106503 The process cannot be continued,
because there is no necessary data for
the configuration.
01022 106504 No more host groups cannot be added
to this port, because the number of hosts
that can be set to the target port has
reached the maximum.
01022 106505 No more host groups cannot be set,
because the number of host groups that
can be set to the port has reached the
maximum.
01022 106506 The specified LU does not exist in the
configuration.
Recommended Action
To change the setting from Target/RCU
Target to Initiator/External, set only 00
to the host group of the target port, set
the host mode to 00 [Standard], and set
all of the host mode options to Disable.
Click [OK], then continue the operation.
Allocate the port to any operable
resource group.
Allocate the host group to any operable
resource group.
Allocate the LDEV to any operable
resource group.
Allocate the host group to any operable
resource group.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the setting(s).
Check the setting(s).
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Severity
Level
W
W
W
W
W
W
E
E
E
W
W
E
Part code 01022 67