HP StorageWorks P9000 Manual page 301

Table 83 Error codes (part code 9205) (continued)
Part Error Error Message
Code Number
9205 66000 The version number entered in the
spreadsheet is incorrect.
9205 66001 The function name entered in the
spreadsheet is incorrect (The function
name is not VR).
9205 66002 The process mode written in the
spreadsheet cannot be specified.
9205 66003 Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
9205 66004 The name of the function tag is invalid
or not entered.
9205 66005 The spreadsheet declaration statement
or the definition statement is not entered
in the spreadsheet file.
9205 66006 The number of data items entered in the
spreadsheet has exceeded the limit.
9205 66007 The number of characters for a row
entered in the spreadsheet has exceeded
the limit.
9205 66008 The number of digits is invalid.
9205 66009 The entered value is outside the setting
range.
9205 66010 The format is invalid.
9205 6601 1 An unnecessary item is included in the
entered definition.
9205 66012 The same definition exists in the
spreadsheet file. (The combination of a
CU number and an LDEV number is
repeated.)
9205 66013 The access attribute set in the [Attribute]
of the spreadsheet is incorrect (an
attribute other than Read/Write, Read
Only, or Protect is entered).
9205 68002 This logical volume cannot be selected
because it is used as a volume for System
Disk.
9205 75015 The setting cannot be changed because
there is no access right for a resource
group of the specified LDEV.
9205 78068 This logical volume cannot be selected
because its emulation type is 3390-V or
it is used as a pool volume.
Recommended Action
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the content of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Enter a correct attribute in the [Attribute]
of the spreadsheet (enter Read/Write,
Read Only, or Protect).
Check the logical volume configuration,
then retry the operation.
Allocate a resource group of the LDEV.
Specify another logical volume or release
the setting of the pool volume, and then
retry the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 9205 301