HP StorageWorks P9000 Manual page 278

Table 65 Error codes (part code 8105) (continued)
Part Error
Code Number
8105 2510
8105 2515
8105 2516
8105 2517
8105 2518
8105 2519
8105 2520
8105 2521
8105 2522
8105 3002
8105 3003
8105 3006
8105 3007
8105 5030
8105 5060
278 Message (part code group 8nnn)
Error Message
No path can be set to the specified
volume because the addition of volumes
is not finished.
One of the following is defined: a
Remote Copy pair, a Continuous Access
Journal pair, or a Continuous Access
Journal Z pair.
Alternatively, command devices defined
by BC Manager are included.
Please release the pair definition or
delete command devices defined by BC
Manager, and then retry the operation.
A Remote Copy, Continuous Access
Journal, or Continuous Access Journal Z
pair is defined. Cancel or suspend the
pair definition, and then retry the
operation.
A Business Copy pair, or a Business
Copy Z pair has been defined.
A Business Copy pair, or a Business
Copy Z pair has been defined.
A Business Copy or Business Copy Z
reserve volume is defined. Cancel the
reserve volume, and then retry the
operation.
A Auto LUN pair is defined. Cancel the
pair definition, and then retry the
operation.
A Auto LUN pair is defined. Cancel the
pair definition, cancel the reserve
volume, and then retry the operation.
A Auto LUN reserved volume is defined.
Cancel the reserved volume, and then
retry the operation.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The spreadsheet has not been changed
at all.
The length of the character string is
invalid.
Recommended Action
Please contact HP Technical Support and
finish adding volumes.
Release the pair definition or delete
command devices defined by Business
Continuity Manager, then retry the
operation.
Cancel or suspend the pair definition,
then retry the operation.
Split the pair, then retry the operation.
If the Quick Split mode is on, suspend
the pair, then split it.
Split the pair, then retry the operation.
If a reserve volume is defined, cancel the
reservation. If the Quick Split mode is
on, suspend the pair, then split it.
Cancel the reserve volume, then retry the
operation.
Cancel the pair definition, then retry the
operation.
Cancel the pair definition, cancel the
reserve volume, then retry the operation.
Cancel the reserved volume, then retry
the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Change the configuration at least one
line in the spreadsheet.
One line can have up to 127 characters.
Severity
Level
W
W
W
W
W
W
W
W
W
E
E
E
E
W
E