HP StorageWorks P9000 Manual page 268

Table 63 Error codes (part code 71 10) (continued)
Part Error
Code Number
71 10 9005
71 10 9101
71 10 9102
71 10 9108
71 10 91 10
71 10 9377
71 10 9378
71 10 55003
71 10 55004
71 10 55597
71 10 58619
71 10 59000
71 10 59048
71 10 59069
71 10 65662
71 10 65729
71 10 66102
268 Message (part code group 7nnn)
Error Message
An error occurred. Check the error code.
Do you want to cancel?
Do you want to apply?
The option has been changed. If you
continue processing before applying the
change, the option will be reset to the
current setting. Do you want to continue
processing?
Do you want to execute the Initialize
operation?
Do you want to enable the setting to
expand the number of relationships?
Do you want to disable the setting to
expand the number of relationships?
The volume in the pair status is included
in the selected T-VOL.
The number of selected S-VOLs is not
corresponding to the number of selected
T-VOLs.
The entered values are incorrect.
The operation cannot be executed
because the obtained information
contains an invalid value.
The CLPR used for the S-VOL differs from
the CLPR used for the T-VOL. Do you
want to continue this operation?
The S-VOL and the T-VOL belong to
different SLPRs. Do you want to continue
this operation?
The S-VOL and the T-VOL belong to
different SLPRs. If you perform this
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
The data has been changed. The settings
will be discarded if you continue the
processing. Do you want to switch the
LDKC?
Pairs cannot be created any more
because SI Operation for FICON(R) Data
Migration is already registered to the
specified volume.
Information was updated by other users.
The list will scroll to the top.
Recommended Action
An error occurred during the indicated
operation. See the error code for each
operation in Preview list.
To cancel, click [OK].
Click [OK] to execute the operation.
To continue processing, click [OK].
Otherwise, click [Cancel].
To continue processing, click [OK].
Otherwise, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
Check the selected T-VOL.
Correct the number of selected S-VOLs
and T-VOLs.
Check the values, and then enter correct
values.
Refresh the window, and then retry the
operation.
To continue the operation, click [OK].
To continue the operation, click [OK].
Please contact HP Technical Support.
To continue processing, click [OK].
Otherwise, click [Cancel].
Delete SI Operation for FICON(R) Data
Migration that is already registered, or
select another volume.
Click [OK], then continue the operation.
Severity
Level
i
i
i
i
W
i
i
W
W
W
W
i
E
E
W
W
W