HP StorageWorks P9000 Manual page 262

Table 62 Error codes (part code 7105) (continued)
Part Error
Code Number
7105 56302
7105 56303
7105 56524
7105 57101
7105 58000
7105 58001
7105 58002
7105 58003
7105 58004
7105 58259
7105 58260
262 Message (part code group 7nnn)
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
This function cannot be used by the
storage partition administrator.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
The command has been rejected
because the cascade request for creating
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
The Add Pair command for adding the
L2 pair has been rejected because the
L1 pair is in V-Split status.
The Quick Restore command has been
rejected because the specified pair is
composed of a normal volume and a
customized volume (CV).
The command has been rejected
because a Remote Copy pair exists in
the same storage system.
The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
The command has been rejected,
because the specified S-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Select a different volume or release the
consistency group setting.
Wait until the L1 pair status changes to
Split, then retry the operation.
Quick restore operation cannot be
performed when the pair is composed
of a normal volume and a customized
volume (CV). Select a different pair.
To continue the operation, delete the
Remote Copy pair.
The requested operation cannot be
performed. Check the status of the
specified volume.
Delete the Remote Copy pair or execute
the operation by other pairs.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the state of Continuous Access
Synchronous Z pair and the Business
Copy Z operations.
Severity
Level
E
E
E
E
W
W
W
W
W
W
W