HP StorageWorks P9000 Manual page 258

Table 62 Error codes (part code 7105) (continued)
Part Error
Code Number
7105 8600
7105 8601
7105 8602
7105 8605
7105 8606
7105 8607
7105 8608
7105 8609
7105 8610
7105 861 1
7105 8612
7105 8613
7105 8614
7105 8615
258 Message (part code group 7nnn)
Error Message
The RAID level of the specified volume
is not supported.
The specified S-VOL cannot be paired
with a backup server volume.
The command has been rejected,
because the specified S-VOL has already
been used as T-VOL of the other pair.
The Resync command was issued to a
device in the simplex status.
The operation to create L2 pair has been
rejected, because the S-VOL of L1 pair
is used as the M-VOL of Continuous
Access Synchronous Z pair.
The command has been rejected,
because the specified T-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
The specified T-VOL is not defined.
The specified volume is not set as a
reserved volume.
The T-VOL is a target volume for Auto
LUN.
The specified volume is a T-VOL.
The specified volume is not a T-VOL.
The RAID level of the specified T-VOL is
not supported.
The command has been rejected,
because the specified T-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
The command has been rejected,
because the specified T-VOL is used as
R-VOL of Continuous Access Synchronous
Z pair.
Recommended Action
Check the RAID level, and specify a
volume of the supported RAID level, then
retry the operation.
Check the contents, and retry.
The volume used as T-VOL of the other
pair cannot be used as S-VOL.
Check the pair status.
When the S-VOL of L1 pair is used as
the M-VOL of Continuous Access
Synchronous Z pair, L2 pair cannot be
created.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the state of Continuous Access
Synchronous Z pair and the Business
Copy Z operations.
Refresh the window, and retry the
operation.
Check the status of the volume.
Release the Auto LUN setting.
Check the status of the volume.
Check the status of the volume.
Specify a volume of the supported RAID
level.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
for Mainframe volumes" in the HP
StorageWorks P9000 Business Copy for
Mainframe Systems User Guide for the
relation between the state of Continuous
Access Synchronous Z pair and the
Business Copy Z operations.
The R-VOL of Continuous Access
Synchronous Z pair cannot be used as
T-VOL of Business Copy Z.
Specify another volume.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W