HP StorageWorks P9000 Manual page 244

Table 59 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 58261
7005 58262
7005 58299
7005 58300
7005 58301
7005 58351
7005 58356
7005 58451
7005 58476
7005 58477
7005 58478
7005 58479
7005 58480
7005 58481
244 Message (part code group 7nnn)
Error Message
The command has been rejected,
because the specified P-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
A pair cannot be created because
shared memory for differential tables is
insufficient.
The operation failed because the
specified P-VOL was a data volume of
Continuous Access Journal. Check the
requirements for using the volume with
Continuous Access Journal.
The operation failed, because the
specified S-VOL was a data volume of
Continuous Access Journal.
The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal
pair.
The command has been rejected,
because the specified volume was used
by Continuous Access Journal and
Continuous Access Synchronous.
The disk subsystem is in internal process.
Please retry the operation.
The operation cannot be performed,
because the specified P-VOL is a P-VOL
for Snapshot.
The operation cannot be performed,
because the specified P-VOL is a V-VOL
for Snapshot.
The operation cannot be performed,
because the specified P-VOL is a pool
volume.
The operation cannot be performed,
because the specified S-VOL is a P-VOL
for Snapshot.
The operation cannot be performed,
because the specified S-VOL is a V-VOL
for Snapshot.
The operation cannot be performed,
because the specified S-VOL is a pool
volume.
Recommended Action
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the HP StorageWorks
P9000 Business Copy User Guide for
the relationship between the state of the
Continuous Access Synchronous pair and
the Business Copy operations.
Add sufficient shared memory to create
a pair.
Check the requirements for using the
volume with Continuous Access Journal.
Release the Continuous Access Journal
setting or specify another volume.
Release the Continuous Access Journal
setting or specify another volume.
Delete the Continuous Access Journal
pair or execute the operation by other
pairs.
Release the pair of Continuous Access
Journal or pair of Continuous Access
Synchronous, then retry the operation.
If the problem persists despite retrying,
please contact HP Technical Support.
Release the Snapshot pair, or select
another volume.
Specify another volume.
Release the pool volume or select
another volume.
Release the Snapshot pair or select
another volume.
Specify another volume.
Release the pool volume or select
another volume.
Severity
Level
W
E
W
W
W
W
W
W
W
W
W
W
W
W