HP StorageWorks P9000 Manual page 210

Table 53 Error codes (part code 6505) (continued)
Part Error
Code Number
6505 68006
6505 68007
6505 68008
6505 68009
6505 68010
6505 68013
6505 68014
6505 68015
6505 68016
6505 68017
6505 68018
6505 68019
6505 68024
210 Message (part code group 6nnn)
Error Message
The Add Pair (Paircreate) operation
failed.
The LDKC number of the specified
primary data volume is different from the
LDKC number of the specified master
journal.
The Add Pair (Paircreate) operation
failed.
The LDKC number of the specified
secondary data volume is different from
the LDKC number of the specified restore
journal.
The Add Pair (Paircreate) operation
failed because the capacity of shared
memory of the primary subsystem was
insufficient.
The Add Pair (Paircreate) operation
failed because the capacity of shared
memory of the remote subsystem was
insufficient.
The specified journal cannot be added
to extended consistency group (EXCTG),
because the specified journal is not
registered, or the status of the specified
journal is "Initial."
The operation failed because the
specified volume was a Thin Provisioning
volume.
The operation failed because the
specified volume was a pool volume of
Thin Provisioning.
The operation failed because the
specified primary data volume was a
Thin Provisioning volume.
The operation failed because the
specified primary data volume was a
pool volume of Thin Provisioning.
The operation failed because the
specified secondary data volume was a
Thin Provisioning volume.
The operation failed because the
specified secondary data volume was a
pool volume of Thin Provisioning.
The secondary subsystem does not
support the LDEV number of the specified
primary data volume.
The operation failed because the current
microcode version does not support Delta
Resync.
Recommended Action
Check if the LDKC number of the primary
data volume and the LDKC number of
the master journal are the same.
Check if the LDKC number of the
secondary data volume and the LDKC
number of the restore journal are the
same.
Check the capacity of shared memory
of the primary subsystem.
Check the remote storage system's
shared memory capacity.
Check the status of the specified journal.
Check whether the specified volume is
a Thin Provisioning volume.
Check whether the specified volume is
a pool volume of Thin Provisioning.
Check whether the specified primary
data volume is a Thin Provisioning
volume.
Check whether the specified primary
data volume is a pool volume of Thin
Provisioning.
Check whether the specified secondary
data volume is a Thin Provisioning
volume.
Check whether the specified secondary
data volume is a pool volume of Thin
Provisioning.
Check whether the secondary subsystem
supports the LDEV number of the
specified primary data volume.
Check the connected storage system's
microcode version.
Severity
Level
W
W
E
E
W
W
W
W
W
W
W
W
W