HP StorageWorks P9000 Manual page 190

Table 53 Error codes (part code 6505) (continued)
Part Error
Code Number
6505 58276
6505 58277
6505 58278
6505 58279
6505 58280
6505 58281
6505 58282
6505 58283
6505 58284
6505 58285
6505 58286
6505 58287
6505 58288
6505 58289
6505 58290
190 Message (part code group 6nnn)
Error Message
The specified secondary data volumes
cannot be paired with another volume,
because the secondary data volume is
used as a journal volume.
The specified secondary data volume is
not registered in the specified journal.
The specified restore journal is not
registered.
The emulation type of the specified
secondary data volume and the restore
journal volume is incorrect due to one of
the following reasons:
The emulation type is not supported.
The combination of emulation types
within the journal is incorrect.
The combination of emulation types
between the journal volumes of the
master and restore journals is
incorrect.
The emulation types of the primary
and secondary data volumes are not
the same.
The specified secondary data group is
already registered.
No more pairs can be registered in the
specified restore journal.
The specified secondary data volume is
already registered in another journal.
The specified secondary data volume
cannot be deleted, because the volume
is already registered in another journal.
An internal error occurred.
No more pairs can be registered
because the number of pairs will exceed
the maximum.
The command was rejected because the
command was issued to the primary data
volume. The command is supposed to be
issued to the secondary data volume.
The command was rejected because the
command was issued to the secondary
data volume. The command is supposed
to be issued to the primary data volume.
The specified primary data volume is
already paired with another volume.
The specified secondary data volume is
already paired with another volume.
The specified primary data volume is not
paired with any another volume.
Recommended Action
Check the status of the specified
secondary data volume.
Check the data volumes in the specified
secondary journal.
Check the status of the specified restore
journal.
Check the emulation type of the specified
secondary data volume or the restore
journal volume.
Check the status of the specified
secondary data volume.
Check the number of pairs in the
specified restore journal.
Identify the journal where the specified
secondary data volume is registered.
Identify the journal where the specified
secondary data volume is registered.
Please contact HP Technical Support.
Check the number of pairs.
Check the command parameters.
Check the command parameters.
Check the status of the specified primary
data volume.
Check the status of the specified
secondary data volume.
Check the status of the specified primary
data volume.
Severity
Level
W
W
W
W
W
W
W
W
E
W
W
W
W
W
W