HP StorageWorks P9000 Manual page 182

Table 53 Error codes (part code 6505) (continued)
Part Error
Code Number
6505 8831
6505 8832
6505 8833
6505 8834
6505 8835
6505 8887
6505 8888
6505 8889
6505 8890
6505 8891
6505 8893
6505 8894
6505 8895
6505 8896
6505 8897
6505 8898
6505 8899
6505 8900
6505 8901
182 Message (part code group 6nnn)
Error Message
The specified secondary data volume is
already reserved by Auto LUN.
Please wait a few minutes and then retry
the operation.
Please wait a few minutes and then retry
the operation.
The Add Pair (Paircreate) operation
failed because you tried to create volume
pairs which exceeded the licensed
capacity.
The Add Pair (Paircreate) operation
failed because you tried to create volume
pairs which exceeded the licensed
capacity of the secondary subsystem.
An internal error occurred.
An internal error occurred.
The specified port is not equipped.
The specified port is being initialized.
Logical paths exist on the port.
An internal error occurred.
Jobs exist on the port.
Jobs exist on the port on the remote
subsystem.
Parameter error has occurred.
LUs exist on the port.
Pending data exists on the port.
An internal error occurred.
An error occurred during the port
change.
An error occurred during the port
change.
Recommended Action
Volumes reserved by Auto LUN cannot
be specified as secondary data volumes.
Check the status of the specified
secondary data volume from the host or
the SVP.
Wait a few minutes and retry the
operation.
Wait for a few minutes and retry the
operation.
See license key information and check
the licensed volume capacity. To create
more pairs, please purchase a license
key for using larger capacity.
See the license key at the secondary
storage system and check the licensed
capacity of volumes. To create more
pairs, please purchase a license key for
larger capacity.
Check the SSB log, then contact HP
Technical Support.
Check the SSB log, then contact HP
Technical Support.
Refresh the window, and retry the
operation. If nothing changes, please
contact HP Technical Support.
Wait until the initialization of the port
ends, and retry the operation.
Delete the logical paths on the port and
retry the operation.
Check the SSB log, then contact HP
Technical Support.
Stop the jobs from the host and retry the
operation.
Stop the jobs from the host and retry the
operation.
Refresh the window, and retry. If nothing
changes, please contact HP Technical
Support.
Delete the LUs defined on the port, and
retry the operation.
Retry the operation.
Check the SSB log, then contact HP
Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
E
E
W
W
W
E
W
W
W
W
W
E
E
E