HP StorageWorks P9000 Manual page 175

Table 52 Error codes (part code 6010) (continued)
Part Error Error Message
Code Number
6010 69022 There are no RCUs available. Register
RCUs in the CU or RCUs of CU Free,
then retry the operation.
6010 69023 There are no RUCs available.
To create pairs that have different CU
numbers coexisting in the pair, register
RCU of CU Free and retry the operation.
To create pairs with RCU in the CU,
select the M-VOLs so that different CU
numbers do not coexist in the M-VOLs,
and retry the operation.
6010 69033 Since the number of preview data
exceeded the maximum, the excess data
were discarded. No more preview data
can be stored.
6010 69034 The number of preview data exceeds the
maximum.
No more preview data can be stored.
6010 69035 Different CU numbers coexist in the
selected M-VOLs. Select M-VOLs so that
different CU numbers do not coexist in
the M-VOLs, and retry the operation.
6010 69036 The file name should be from 1 to 32
characters.
6010 69037 More than 256 script files cannot be
transferred to the SVP.
6010 69038 File name is not selected.
6010 69039 Are you sure you want to delete the
selected file?
6010 69071 The current DKCMAIN microprogram
cannot use External Storage Access
Manager.
6010 69072 The operation cannot be executed,
because the External Storage Access
Manager is not installed.
6010 69076 Are you sure you want to delete the
quorum disk ID?
6010 69085 [Warning]
If you perform this operation, there are
some pairs that will change the pair
mode from [Sync] to [ESAM].
And all of the P-VOL fence level of these
pairs will change to [Never].
Are you sure you want to continue this
operation?
Recommended Action
Register RCUs in the CU or RCUs of CU
Free, then retry the operation.
To create pairs that have different CU
numbers coexisting in the pair, register
RCU of CU Free and retry the operation.
To crate pairs with RCU in the CU, select
the M-VOLs so that different CU numbers
do not coexist in the M-VOLs, and retry
the operation.
Click [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
Click [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
Select M-VOLs so that different CU
numbers do not coexist in the M-VOLs,
and retry the operation.
Change the number of characters used
for the file name to less than 32, then
retry operation.
Delete the unnecessary script files, then
retry the operation.
Select the file name, then retry the
operation.
To delete the file, click [OK], To cancel
the deletion, click [Cancel].
Please contact HP Technical Support after
checking the version of the DKAMAIN
microprogram.
Install the External Storage Access
Manager program product.
To delete the quorum disk ID, click [OK].
Otherwise, click [Cancel].
To perform the operation, click [OK].
Otherwise, click [Cancel].
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
i
Part code 6010 175