HP StorageWorks P9000 Manual page 162

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 58509
6005 58568
6005 58569
6005 58586
6005 58640
6005 58712
6005 58714
6005 65740
6005 6801 1
162 Message (part code group 6nnn)
Error Message
A communication time-out error
occurred between MCU and RCU.
Please wait for a while, and then retry
the operation.
A pair cannot be created because the
specified M-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
A pair cannot be created because the
specified R-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
The operation failed because the host
did not allow the specified R-VOL to be
used as an R-VOL.
The Add Pair operation failed.
The volume pair cannot be created with
Time Stamp set, because RCU does not
support 4x4x4 cascade function.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the RCU is
insufficient.
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the MCU is
insufficient.
The configuration changing processes
are conflicting at DKC.
The operation failed because the
specified M-VOL was used as a Thin
Provisioning volume.
Recommended Action
Wait a while, then retry the
operation.
Confirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
Confirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
Check whether the number
of the specified R-VOL is
correct or the status of the
usage of the host to the
specified R-VOL.
Check whether the version
of DKC microcode of RCU
supports the 4x4x4 cascade
function. If the version does
not support the 4x4x4
cascade function, update the
microcode of RCU to the
version that supports the
function, or retry the Add
Pair operation with the
setting that does not transfer
Time Stamp.
Check the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
Check the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
Check if the configuration
changing process by RAID
Manager, Auto LUN, or
Quick Restore is not in the
operation, then retry the
operation.
Check whether the specified
R-VOL is a Thin Provisioning
volume.
Severity Level
W
W
W
W
W
W
W
W
W