HP StorageWorks P9000 Manual page 157

Remote web console messages
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 50 Error codes (part code 6005) (continued)
Part
Error
Error Message
Code
Number
6005
8921
The specified M-VOL must not be in an
intervention-required condition, in a
protection condition, in an unusable
condition, the Business Copy/Business
Copy Z T-VOL/reserved volume or a
reserved volume of Auto LUN.
6005
8924
Logical paths exist on the RCU port.
6005
8926
The specified R-VOL is prohibited to use
by Volume Security for Mainframe.
6005
8927
The specified M-VOL is prohibited to
use by Volume Security for Mainframe.
6005
8929
Invalid port type.
6005
8930
Logical paths exist on the RCU port.
6005
8931
Logical paths exist on the RCU port.
6005
8932
Since the configuration definition of the
specified LDKC number or CU number
does not exist, the logical paths
between MCU and RCU cannot be
established.
6005
8934
The Paircreate operation failed because
specified R-VOL is the NAS system
volume.
6005
8936
The Paircreate operation failed. The
version of the specified RCU does not
support Remote Copy with the NAS
volume.
6005
8939
The specified M-VOL cannot be used.
6005
8940
The operation failed because the
specified R-VOL was in a Read Only
status by Volume Retention.
Recommended Action
Check the status of the
specified M-VOL.
Delete the LUs defined on
the specified port, then retry
the operation.
Confirm the status of Volume
Security for Mainframe of
the specified R-VOL.
Confirm the status of Volume
Security for Mainframe of
the specified M-VOL.
Refresh the window, then
retry the operation.
If the same problem persists
despite retrying, please
contact HP Technical
Support.
Delete the LUs defined on
the specified port, then retry
the operation.
Delete the LUs defined on
the specified port, then retry
the operation.
Check whether the specified
LDKC number or CU number
is defined as configuration
information of the MCU.
Check the configuration of
the specified R-VOL.
Check the microcode version
of the RCU.
Check the LUN of the
specified M-VOL by using
RAID Manager, and specify
the LUN with the value less
than 1,024 for the M-VOL.
Confirm the status of the
specified R-VOL.
Severity Level
W
W
W
W
W
W
W
W
W
W
W
W
Part code 6005 157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500Storageworks p9500

Table of Contents