HP StorageWorks P9000 Manual page 156

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8906
6005 8907
6005 8908
6005 8909
6005 8910
6005 891 1
6005 8912
6005 8913
6005 8914
6005 8915
156 Message (part code group 6nnn)
Error Message
No more space is left in RCU for
differential management.
The extended SM is not equipped in
RCU.
Invalid parameter.
A Port exchange error occurred.
A Port exchange error occurred.
Logical paths exist on the port.
Logical paths exist on the port.
Invalid port type.
Multi platform feature already installed
in subsystem.
The port type exchange operation is
rejected because the host(s) is(are)
processing the port type exchange.
Recommended Action
If the extended shared
memory (SM #2) is not
installed in RCU, install the
shared memory to RCU
according to the installation
instruction of the extended
shared memory for remote
copy ("Shared Memory Size
Configuration" dialog box),
then create a pair.
If SM #2 is installed in RCU,
you cannot create any more
pairs because the number of
pairs has already reached
the maximum that can be
created by the system.
Install the extended shared
memory to RCU according
to the installation instruction
of the extended shared
memory for remote copy
("Shared Memory Size
Configuration" dialog box).
Specify a correct value.
Please contact HP Technical
Support.
Please contact HP Technical
Support.
Delete the LUs defined on
the specified port, then retry
the operation.
Delete the LUs defined on
the specified port, then retry
the operation.
Refresh the window, then
retry the operation.
If the same problem persists
despite retrying, please
contact HP Technical
Support.
The multiplatform feature has
already been installed in the
storage system. Verify the
configuration of the storage
system.
Refresh the window, then
retry the operation.
If the same problem persists
despite retrying, please
contact HP Technical
Support.
Severity Level
E
E
W
E
E
W
W
W
W
W