HP StorageWorks P9000 Manual page 152

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8840
6005 8841
6005 8842
6005 8843
6005 8844
6005 8845
6005 8846
6005 8847
6005 8848
152 Message (part code group 6nnn)
Error Message
Suspend(Pairsplit-r) operation is not
valid for R-VOL.
The specified volume is not a R-VOL.
R-VOL status change failed after M-VOL
status change. Confirm R-VOL status.
Suspend(Pairsplit-r) operation failed
because specified volume or other
volume in the same group is not in
permissible status.
Suspend(Pairsplit-r) operation failed
because specified volume or other
volume in the same group is in status
transition.
Preset Suspension is effective in the CT
Group.
An internal error occurred.
An internal error occurred.
Please wait a few minutes and retry the
Suspend Pair(Pairsplit-r) operation.
Recommended Action
Suspend mode is not valid
for the R-VOL. Check the
volume, and retry.
Refresh the window, and
check whether the specified
volume is a R-VOL.
Confirm the R-VOL status.
The operation failed,
because of one of the
following reasons:
The specified volume is
simplex.
There is no duplex or
duplex-pending volume
in the group.
Either the specified
volume or another
volume in the same group
is suspended.
Verify the volume status, and
retry the operation.
The operation failed,
because of one of the
following reasons:
The specified volume or
another volume in the
same group is deleting.
The specified volume or
another volume in the
same group is
suspending.
Wait for the change in status
to be completed, then retry
the operation.
Cancel the preset suspension
in the CT group, then retry
the operation.
Please contact HP Technical
Support.
Please contact HP Technical
Support.
The suspend pair (Pairsplit-r)
operation failed. A few
minutes later, refresh the
window, confirm if the
specified volumes are in the
permissible status, then retry
the operation.
Severity Level
W
W
W
W
W
i
E
E
W