HP StorageWorks P9000 Manual page 149

Table 50 Error codes (part code 6005) (continued)
Part Error Error Message
Code Number
6005 8796 The operation failed because the
specified R-VOL applied to any of the
following:
A T-VOL of Business Copy Z or
Compatible FlashCopy.
An S-VOL of Business Copy.
A reserved volume of Business Copy
Z or Business Copy.
A volume of Business Copy Z or
Business Copy in Reverse Copy
status.
A volume of FICON(R) Data
Migration.
6005 8797 If the M-VOL is a Business Copy
Z/Compatible FlashCopy T-VOL, one
S-VOL must be paired with one T-VOL.
If the M-VOL is a Business Copy S-VOL,
one P-VOL must be paired with one
S-VOL.
6005 8798 The MCU is already used for Business
Copy Z/Business Copy/Compatible
FlashCopy.
6005 8799 The M-VOL is already in use for Auto
LUN.
6005 8800 The R-VOL is already in use for Auto
LUN.
6005 8801 The R-VOL is reserved, or the RCU or
the path between MCU-RCU is in a
heavy load condition.
6005 8808 Please retry Add
Pair(Paircreate)/Resume Pair(Pairresync)
operation in a few minutes.
6005 8809 Please wait. Retry Add
Pair(Paircreate)/Resume Pair(Pairresync)
operation in a few minutes.
Recommended Action
Check the status of the
specified R-VOL from the
host or the SVP.
Check the status of the
specified M-VOL from the
host or the SVP.
Confirm the status of
Business Copy Z/Business
Copy/Compatible
FlashCopy in MCU from the
host or the SVP.
Verify the status of the
specified M-VOL.
Verify the status of the
specified R-VOL.
Verify the status of the
specified R-VOL. If the
device is not reserved, retry
the operation.
The add/resume pair
operation failed, because
the either the specified
volume or another volume in
the same group is being
changed to simplex or
suspend status. Retry the
operation after the status
change is completed.
Add/resume pair operation
failed. The specified volume
or another volume in the
same group being changed
to simplex/suspend status in
RCU. After a few minutes,
refresh and check the
Continuous Access
Synchronous window. If
specified volume is in a
permissible status, retry the
operation.
Severity Level
W
W
W
W
W
W
W
W
Part code 6005 149