HP StorageWorks P9000 Manual page 123

Table 46 Error codes (part code 5205) (continued)
Part Error Error Message
Code Number
5205 1235 The volume specified as a migration
target cannot be migrated, because it is
used as S-VOL or R-VOL of Continuous
Access Synchronous, Continuous Access
Synchronous Z, or External Storage
Access Manager.
5205 1236 The RAID level of the target volume is not
supported.
5205 1237 The specified volume(s) are already used
by Business Copy Z or Business Copy.
5205 1238 The specified volume(s) are already used
by Business Copy Z or Business Copy.
5205 1239 The volume(s) is already being used by
Data Migration.
5205 1240 The specified volume(s) are already used
by Business Copy Z or Business Copy.
5205 1241 The volume specified as the migration
source has the Cache Residency setting.
5205 1242 The volume specified as the migration
target has the Cache Residency setting.
5205 1243 The specified volume is not a source
volume.
5205 1246 The number of plans that could be
executed at once exceeds the maximum.
5205 1247 The volume is already a source volume.
5205 1606 The program product of Auto LUN is not
installed.
5205 1607 Volume Security for Mainframe settings
exist on the specified volume.
5205 1608 Volume Security for Mainframe settings
exist on the specified volume.
5205 1609 Volume Retention settings exist on the
specified volume.
5205 1610 Volume Retention settings exist on the
specified volume.
5205 161 1 The specified volume has Read
Only/Protect/S-VOL Disable setting of
Data Retention.
5205 1612 The specified volume has Read
Only/Protect/S-VOL Disable setting of
Data Retention.
5205 2003 An internal process is being executed,
or maintenance is in progress.
Recommended Action
Specify another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Specify another volume.
Specify another volume.
Release the Data Migration.
Check the status of the selected volume.
Specify another volume.
Specify another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Install the Auto LUN program product.
Release the Volume Security for
Mainframe settings.
Release the Volume Security for
Mainframe settings.
Release the Volume Retention settings.
Release the Volume Retention settings.
Release the Read Only/Protect/S-VOL
Disable setting of Data Retention.
Release the Read Only/Protect/S-VOL
Disable setting of Data Retention.
Confirm that maintenance operation is
not in progress, and retry after a while.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 5205 123