HP StorageWorks P9000 Manual page 118

Table 45 Error codes (part code 05122) (continued)
Part Error
Code Number
05122 1051 12
05122 1051 13
05122 1051 14
05122 1051 15
05122 1051 16
05122 105226
05122 105227
05122 105228
05122 105229
05122 105230
05122 105247
05122 105254
05122 107001
05122 107002
1 18 Message (part code group 5nnn)
Error Message
The graph cannot be displayed, because
there is no graph data.
The real time graph display will end due
to changing the monitoring switch.
The CU to be monitored cannot be
added, because the number of CUs that
can be specified exceeds the maximum.
A WWN to be monitored cannot be
added, because the number of graph
display objects exceeds the maximum.
A WWN to be monitored cannot be
added, because the number of graph
display objects per one port exceeds the
maximum.
The Graph Display Term cannot be
changed, because there is no graph
data.
The HBA WWN is unedited.
The WWN Name is unedited.
No more WWN to be monitored can
be added, because the number of
monitoring WWNs has reached the
maximum.
There are no selectable parity groups.
The disk subsystem is in internal process,
or some other user is changing the
configuration. Wait, then retry the
operation.
No more graph items can be added
because the number of graph items that
can be displayed in one graph panel
has reached the maximum.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
Recommended Action
Wait for a while, then retry the
operation.
Retry the operation if you need the real
time graph display.
Reduce the number of CUs to be
monitored to 64 or fewer.
Reduce the number of WWNs to be
monitored to 2048 or fewer.
Reduce the number of WWNs to be
monitored to 32 or fewer per port.
Click [OK].
Edit the HBA WWN. If you do not edit
it, uncheck the check box.
Edit the WWN Name. If you do not edit
it, uncheck the check box.
Delete unnecessary monitoring WWNs,
then retry the operation.
Click [OK].
If the same problem occurs again, close
the windows, and retry the operation
after the internal processing or the
configuration change has been
completed. If the internal processing or
the configuration change takes much
time to complete, please contact HP
Technical Support.
Set the number of graph items per one
graph panel to 8 or less.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
E
W
E
E