Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 788

CUP In-Band Management
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
CUP is supported by switches and directors in the Cisco MDS 9000 Family. The CUP function allows
the mainframe to manage the Cisco MDS switches.
Host communication includes control functions such as blocking and unblocking ports, as well as
monitoring and error reporting functions.
In Fabric Manager, choose Zone > Edit Full Zoneset, and then choose Edit > Edit Default Zone
Step 1
Attributes to set the default zone to permit for the required VSAN. (See
Figure 36-26
In Device Manager, choose FC > Name Server... for the required VSAN and obtain the FICON:CUP
Step 2
WWN. See
Figure 36-27
Note
In Fabric Manager, choose Zone > Edit Full Zoneset and add the FICON:CUP pWWN to the zone
Step 3
database. (See
Cisco MDS 9000 Family Fabric Manager Configuration Guide
36-38
Setting the Default Zone Policy
Figure 36-27.
Finding pWWN for FICON:CUP
If more than one
FICON:CUP WWN
to the required zone.
Figure 36-28.)
exists in this fabric, be sure to add all the
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 36 Configuring FICON
Figure 36-26.)
pWWNs
FICON:CUP