Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 1201

Chapter 55 Configuring SCSI Flow Services and Statistics
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Expand End Devices and then select SSM Features in the Physical Attributes pane.
Step 1
You see the Intelligent Storage Services configuration, showing the FCWA tab in the Information pane
shown in
Figure 55-4
Click Create Row in the Information pane to create a SCSI flow or click a row in the FCWA table to
Step 2
modify an existing SCSI flow.
You see the FC Write Acceleration dialog box shown in
Figure 55-5
Select the initiator and target WWNs and VSAN IDs and check the WriteAcc check box to enable Fibre
Step 3
Channel write acceleration on this SCSI flow.
(Optional) Enable SCSI flow statistics on this SCSI flow by checking the Enable Statistics check box.
Step 4
(Optional) Change the BufCount value to set the number of 2K buffers used by the SCSI target.
Step 5
Click Create to create this SCSI flow.
Step 6
OL-17256-03, Cisco MDS NX-OS Release 4.x
Figure 55-4.
FCWA Tab
FC Write Acceleration Dialog Box
Figure 55-5.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
SCSI Flow Services
55-5