Rmon-Based Alerts; Configuring Rmon Alerts Using Fabric Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 62 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 62-9
Click the Create Row icon.
Step 4
You see the Create Call Home Profile dialog box.
Select the switches for which you want to send alerts.
Step 5
Enter the name of the profile in the Name field.
Step 6
Choose the message format, message size, and message severity level.
Step 7
Check the syslogGroupPort check box in the AlertGroups section.
Step 8
Click Create to create the profile for the syslog-based alerts.
Step 9
Step 10 Close the dialog box.

RMON-Based Alerts

You can configure the switch to send Call Home notifications corresponding to RMON alert triggers. All
RMON-based Call Home messages have their message level set to NOTIFY (2). The RMON alert group
is defined for all RMON-based Call Home alerts. To receive an RMON-based Call Home alert, you must
associate a destination profile with the RMON alert group.

Configuring RMON Alerts Using Fabric Manager

To configure RMON alert groups using Fabric Manager, follow these steps:
Select a switch in the Fabric pane.
Step 1
Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
Step 2
You see the Call Home information in the Information pane.
Click the Profiles tab.
Step 3
You see the Call Home profiles shown in
Figure 62-10
OL-17256-03, Cisco MDS NX-OS Release 4.x
Call Home Profiles
Figure
Call Home Profiles
Cisco MDS 9000 Family Fabric Manager Configuration Guide
62-10.
RMON-Based Alerts
62-13