Port Security Activation; Activating Port Security - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 46 Configuring Port Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click the Control tab.
Step 5
You see the port security enable state for all switches in the selected VSAN (see
Figure 46-7
Set the Command column to enable for each switch in the VSAN.
Step 6
Click the CFS tab and set the Command column to commit on all participating switches in the VSAN.
Step 7
Click Apply Changes to distribute the enabled port security to all switches in the VSAN.
Step 8

Port Security Activation

This section includes the following topics:
•
•
•
•
•
•
•
•

Activating Port Security

To activate port security using Fabric Manager, follow these steps: :
Expand a VSAN and select Port Security in the Logical Domains pane.
Step 1
You see the port security configuration for that VSAN in the Information pane.
Click the Actions tab.
Step 2
OL-17256-03, Cisco MDS NX-OS Release 4.x
Port Security Configuration
Activating Port Security, page 46-9
Database Activation Rejection, page 46-10
Forcing Port Security Activation, page 46-10
, page 46-11
Copying an Active Database to the Config Database, page 46-11
Displaying Activated Port Security Settings, page 46-12
Displaying Port Security Statistics, page 46-12
Displaying Port Security Violations, page 46-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Port Security Activation
Figure 46-7).
46-9