Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 600

Configuring SDV
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 27-6
Step 4 Click the Apply Changes icon to commit the configuration change.
Click the CFS tab. Confirm that the SAN device virtualization feature is enabled for the switch.
Step 5
Click the Virtual Devices tab and then click the Create Row icon.
Step 6
You see the Create Virtual Devices dialog box (see
Figure 27-7
Step 7 Select the Virtual Device ID from the drop-down list (ranges from 1 to 4096).
Step 8 Enter a Name for the Virtual Device. Select the Virtual Domain and enter a Virtual FC ID for the virtual
target.
Step 9 Check only the autoFailover check box, or check the autoFailover and primFallback check boxes. For
more information, see the
the option in the Option column of the Virtual Devices tab. (See
Cisco MDS 9000 Family Fabric Manager Configuration Guide
27-6
Enabling SAN Device Virtualization
Create Virtual Devices Dialog Box
"Automatic Failover and Fallback" section on page
Chapter 27
Figure 27-7).
27-4. You can also change
Figure 27-8).
OL-17256-03, Cisco MDS NX-OS Release 4.x
SAN Device Virtualization