System Message Logging Configuration; Message Logging Initiation - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 61 Configuring System Message Logging
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 61-1
Facility Keyword
wwn
xbar
zone
Table 61-2
Table 61-2
Level Keyword
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Refer to the Cisco MDS 9000 Family System Messages Reference for details on the error log message
Note
format.

System Message Logging Configuration

System logging messages are sent to the console based on the default (or configured) logging facility
and severity values.
This sections includes the following topics:
•
•
•
•
•
•
•

Message Logging Initiation

You can disable logging to the console or enable logging to a given Telnet or SSH session.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Internal Logging Facilities (continued)
Description
WWN manager
Xbar system messages
Zone server
describes the severity levels supported by the system message logs.
Error Message Severity Levels
Level
0
1
2
3
4
5
6
7
Message Logging Initiation, page 61-3
Console Severity Level, page 61-4
Module Logging, page 61-5
Log Files, page 61-6
System Message Logging Servers, page 61-7
Verifying Syslog Servers from Fabric Manager Web Server, page 61-10
Viewing Logs from Fabric Manager Web Server, page 61-11
Standard or Cisco MDS Specific
Cisco MDS 9000 Family specific
Cisco MDS 9000 Family specific
Cisco MDS 9000 Family specific
Description
System unusable
Immediate action needed
Critical conditions
Error conditions
Warning conditions
Normal but significant condition
Informational messages only
Debugging messages
Cisco MDS 9000 Family Fabric Manager Configuration Guide
System Message Logging Configuration
System Message Definition
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
61-3