Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 946

Configuring IPsec Using FCIP Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 44-7
The Control tab is the default. Verify that the switches you want to modify for IPSec are enabled in the
Step 2
Status column.
Expand Switches > Security and then select IKE in the Physical Attributes pane.
Step 3
You see the IKE configuration in the Information pane shown in
Figure 44-8
The Control tab is the default. Verify that the switches you want to modify for IKE are enabled in the
Step 4
Status column.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
44-12
IPSec Configuration
IKE Configuration
Chapter 44 Configuring IPsec Network Security
Figure 44-8.
OL-17256-03, Cisco MDS NX-OS Release 4.x