Displaying Sfp Transmitter Types; About Gathering Interface Statistics; Gathering Interface Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Fabric manager configuration guide, release 4.x

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Interfaces

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Standard transmitters defined in the GBIC specifications

Displaying SFP Transmitter Types

To show the SFP types for an interface using Fabric Manager, follow these steps:

Expand Switches > Interfaces and then select FC Physical. You see the interface configuration in the

Information pane.

Click the Physical tab to see the transmitter type for the selected interface.

You can use Fabric Manager or Device Manager to collect interface statistics on any switch. These

statistics are collected at intervals that you can set.

In Fabric Manager, you can collect interface statistics by expanding Switches > ISLs and selecting

Statistics from the Physical Attributes pane.

To gather and display interface counters using Device Manager, follow these steps:

Right-click an interface and select Monitor.

You see the Interface Monitor dialog box.

Set both the number of seconds at which you want to poll the interface statistics and how you want the

data represented in the Interval drop-down menus. For example, click 10s and LastValue/sec.

Select any tab shown in

Cisco MDS 9000 Family Fabric Manager Configuration Guide

SFP Transmitter Acronym Definitions (continued)

Figure 20-11

to view those related statistics.

OL-17256-03, Cisco MDS NX-OS Release 4.x

Configuring Interfaces

Show Quick Links

Table of Contents