About Cfs Distribution Of Allowed Domain Id Lists; Enabling Distribution - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Fabric manager configuration guide, release 4.x
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Domain IDs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click Apply Changes to enable CFS distribution for the allowed domain ID list.
Step 3
Select the Allowed DomainIds tab.
Step 4
You see the Allowed Domain ID screen shown in
Figure 25-9
Set the list to the allowed domain IDs list for this domain.
Step 5
Step 6
Select the CFS tab and set Config Action to commit.
Step 7
Click the Apply Changes icon to commit this allowed domain ID list and distribute it throughout the
VSAN.

About CFS Distribution of Allowed Domain ID Lists

You can enable the distribution of the allowed domain ID lists configuration information to all Cisco
MDS switches in the fabric using the Cisco Fabric Services (CFS) infrastructure. This feature allows you
to synchronize the configuration across the fabric from the console of a single MDS switch. Since the
same configuration is distributed to the entire VSAN, you avoid possible misconfiguration and the
likelihood that two switches in the same VSAN have configured incompatible allowed domains.
All switches in the fabric must be running Cisco SAN-OS Release 3.0(1) or later to distribute the allowed
Note
domain ID list using CFS.
Use CFS to distribute the allowed domain ID list to ensure consistency in the allowed domain ID lists
on all switches in the VSAN.
Note
We recommend configuring the allow domain ID list and committing it on the principle switch.
For more information about CFS, see

Enabling Distribution

CFS distribution of allowed domain ID lists is disabled by default. You must enable distribution on all
switches to which you want to distribute the allowed domain ID lists.
To enable (or disable) allowed domain ID list configuration distribution using Fabric Manager, follow
these steps:
Cisco MDS 9000 Family Fabric Manager Configuration Guide
25-12
Allowed Domain ID List
Chapter 13, "Using the CFS Infrastructure."
Chapter 25
Figure
25-9.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring Domain Parameters

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents