Editing Ficon Configuration Files; Displaying Ficon Configuration Files - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

FICON Configuration Files
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 36-17
Highlight the file you want to apply and click Apply File to apply the configuration to the running
Step 3
configuration.

Editing FICON Configuration Files

The configuration file submode allows you to create and edit FICON configuration files. If a specified
file does not exist, it is created. Up to 16 files can be saved. Each file name is restricted to eight
alphanumeric characters.
Note To view the latest FICON information, you must click the Refresh button. See the
Saving the Running Configuration" section on page
To edit the contents of a specified FICON configuration file using Device Manager, follow these steps:
Choose FICON > VSANs.
Step 1
Click the Files tab.
Step 2
You see the FICON VSANs dialog box (see
Select a VSAN ID and then click Open to edit the FICON configuration file.
Step 3
Select a VSAN ID and then click Delete to delete the FICON configuration file.
Step 4
Click Apply to apply the changed FICON configuration file.
Step 5

Displaying FICON Configuration Files

Choose FICON > VSAN.
Step 1
You see the FICON configuration table in the Information pane.
Click the Files tab.
Step 2
Select the file you want to open.
Step 3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
36-30
FICON VSANs Dialog Box
To open and view configuration files in Fabric Manager, follow these steps:
36-23.
Figure 36-17).
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 36 Configuring FICON
"Automatically