Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 342

Using the Server Admin FlexAttach Wizards
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 14-19
In the Failed Port selection window, from the Select a Switch drop-down list, select the switch.
Step 4
From the list of interfaces displayed, select the port on which the server needs to be replaced.
Step 5
Click Next.
Step 6
The Server WWN window is displayed.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
14-20
Failed Port Selection
(Figure
Chapter 14 Configuring FlexAttach Virtual pWWN
14-20)
OL-17256-03, Cisco MDS NX-OS Release 4.x