Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 644

IVR Zones and IVR Zone Sets
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 29-15
If you want to view zone membership information, right-click in the Members column, and then click
Show Details for the current row or all rows from the pop-up menu.
Click Zones in the left pane and click the Insert icon to create a zone.
Step 2
You see the Create IVR Zone dialog box shown in
Figure 29-16
Step 3 Enter an IVR zone name.
Step 4 Check one of the following check boxes:
Read Only—The zone permits read and denies write.
a.
Permit QoS traffic with Priority—You set the priority from the drop-down menu.
b.
Click OK to create the IVR zone.
Step 5
To add members to this zone, select the members you want to add from the Fabric pane (see
Step 6
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
29-24
Edit IVR Local Full Zone Database Dialog Box
Create IVR Zone Dialog Box
29-17) and click Add to Zone.
Chapter 29 Configuring Inter-VSAN Routing
Figure 29-16.
OL-17256-03, Cisco MDS NX-OS Release 4.x