Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 379

Chapter 17 Configuring High Availability
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 17-3
State
Active with HA standby The active supervisor module in the switch is ready to be configured. The
Shutting down
HA switchover in
progress
Offline
HA synchronization in
progress
Standby (failed)
Active with failed
standby
Other
OL-17256-03, Cisco MDS NX-OS Release 4.x
Internal States (continued)
Description
standby module is in the HA-standby state.
The switch is being shut down.
The switch is in the process of changing over to the HA switchover
mechanism.
The switch is intentionally shut down for debugging purposes.
The standby supervisor module is in the process of synchronizing its state
with the active supervisor modules.
The standby supervisor module is not functioning.
The active supervisor module and the second supervisor module is present
but is not functioning.
The switch is in a transient state. If it persists, call TAC.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Synchronizing Supervisor Modules
17-5