Managing Rmon Alarms - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 59 Configuring RMON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 59-17
Configure the RMON threshold event attributes by choosing the type of event (log, snmptrap, or
Step 4
logandtrap).
Step 5 Increment the index. If you try to create an event with the existing index, you see a duplicate entry error
message.
Step 6 (Optional) Provide a description and a community.
Step 7 Click Create, then close this dialog box.
Verify that your event is listed in the remaining RMON Thresholds dialog box.
Step 8
Click Close to close the RMON Thresholds dialog box.
Step 9

Managing RMON Alarms

To view the alarms that have already been enabled using Device Manager, follow these steps:
Choose Admin > Events > Threshold Manager and click More in the Threshold Manager dialog box.
Step 1
Step 2 Click the Alarms tab.
You see the RMON Thresholds dialog box as shown in
Figure 59-18
OL-17256-03, Cisco MDS NX-OS Release 4.x
Create RMON Thresholds Events Dialog Box
RMON Thresholds Dialog Box
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Create RMON Alarms in Fabric Manager
Figure 59-18.
59-15