Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 357

Chapter 15 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 15-7
Note
Caution
Click Yes to upgrade.
Step 10
Click Finish to start the installation.
Step 11
You see the Download and Install Status dialog box shown in
OL-17256-03, Cisco MDS NX-OS Release 4.x
Version Check Results Dialog box
The version check provides information about the impact of the upgrade for each module on the
switch. It also shows any HA-related incompatibilities that might result. You see a final dialog
box at this stage, prompting you to confirm that this check should be performed. We recommend
that you do not ignore the version check results.
If Ignore version check results is checked, the upgrade will proceed even if the current
switch version is newer than the version you are installing.
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Using the Software Install Wizard
15-8.
15-11